Signed & sealed sign plans in 2 business days.
Enter your sign dimensions, upload your artwork, and pay online. Our calculator runs the wind and foundation design to current code, and a licensed Professional Engineer reviews, signs and seals your permit-ready plan set.
Start your sign plans → How it worksFrom sketch to sealed plans, without the back-and-forth.
You give us the sign and the site. The calculator does the structural work in real time, and an engineer checks it before anything goes out with a seal on it.
Describe your sign
Pick a pole, monument or wall sign and enter its dimensions and site address.
Upload artwork
Upload a JPG or PNG of the sign face. It goes on the elevation sheet so the reviewer knows exactly what's being built.
See it calculated
Wind loads, pole size and foundation are calculated as you type. Pay securely when you're ready.
PE seals it
A licensed engineer reviews the plan set, then signs and seals it. Permit-ready PDF within 2 business days.
Flat-rate engineering. No quotes, no waiting.
Every plan set includes an elevation, a foundation detail, full structural calculations and general notes, signed and sealed for the state where the sign is built.
Single-pole pylon
Cantilever pipe column on a drilled concrete shaft. Includes the torsion check for eccentric wind.
Double-pole pylon
Two-post sign with the Case B load shift applied to the more heavily loaded pole.
Monument sign
Ground-mounted sign on a spread footing, checked for overturning, bearing and sliding.
Wall sign
Cabinets and channel letters. Wind pressure for the wall zone, with the anchor type and spacing for CMU, concrete, wood or steel studs.
Add-ons apply automatically: High-Velocity Hurricane Zone (Miami-Dade & Broward) +$49 · Texas coastal windstorm counties +$29 · Signs over 40 ft tall or 300 sf +$49.
Designed to the code your permit will be reviewed under.
Choose the code edition your jurisdiction enforces and the design follows it. The engineer of record confirms it during review.
Florida
Florida Building Code, 8th Ed. (2023) or 9th Ed. (2026)
- 9th Edition takes effect December 31, 2026
- Wind design per ASCE 7-22
- HVHZ provisions for Miami-Dade & Broward
Alabama
IBC as locally adopted (2018 / 2021 / 2024)
- ASCE 7-16 or 7-22, matched to the IBC edition
- Gulf Coast hurricane wind speeds for Mobile & Baldwin
- Presumptive or geotech soil values
Texas
IBC as locally adopted (2018 / 2021 / 2024)
- ASCE 7-16 or 7-22, matched to the IBC edition
- Coastal TDI windstorm counties flagged
- Clay-soil (Class 5) foundations handled
What does "2-business-day turnaround" mean exactly?
Orders that are paid and complete by 3:00 PM Central on a business day are due by 5:00 PM Central two business days later. Orders placed after the cutoff, on weekends or on holidays start counting the next business day. The clock starts only once all required information is in.
Is the calculator's output the final design?
No. The calculator produces a preliminary plan set. A licensed Professional Engineer reviews every set, verifies wind speed, exposure and soils for your site, makes any changes needed, then signs and seals it. Nothing is valid for construction until it's sealed.
What's included in the plan set?
One full-size 24×36 sheet with the sign elevation, foundation or attachment details, complete structural calculations, general notes and your artwork, plus the engineer's title block and seal. All text is at least 1/8" tall, so it's easy to read at plan review.
What if my site has bad soil or I have a geotechnical report?
Choose "Per geotechnical report" and enter the allowable lateral and bearing values. Where muck, organics or high groundwater are likely, the engineer may ask for a soils report before sealing.
Do you design wall signs and channel letters?
Yes. Wall signs, including cabinets and channel letters on raceways or mounted directly, are designed with the anchor type and spacing for your wall construction. Contact us for billboards, roof signs, or anything taller than 50 ft.