Signed & Sealed Plans for Permits
Florida sign permits need drawings signed and sealed by a Florida-licensed Professional Engineer. We design to the Florida Building Code, 8th Edition (2023), with wind loads per ASCE 7-22, and move to the 9th Edition (2026) when it takes effect on December 31, 2026.
The wind speed is looked up at the job address, not taken from a county table. In Miami-Dade and Broward the High-Velocity Hurricane Zone rules apply: Exposure C at minimum and the wind speeds in FBC Section 1620.
Every plan shows the FEMA flood zone for the site. Signs in flood hazard areas are checked for flood loads, and coastal V-zone signs get deep foundations instead of spread footings.
Plans are digitally signed and sealed under Florida Rule 61G15-23.004, which building departments accept for electronic permit submittals. Each sheet prints on 11×17.
What's covered
- Every county in Florida, from Pensacola and Panama City to Jacksonville, Orlando, Tampa, Fort Myers and Miami
- Pole, pylon, monument, wall, channel letter and blade signs
- Drilled shaft, spread footing and pier foundations sized for the site
How it works
- Enter the job address. We look up the wind speed and flood zone there.
- Enter the sign type and size. The form shows only the options that meet code at that address, and the flat price.
- Pay online. A licensed engineer reviews, signs and seals the plan in 48 to 72 hours, or the same day with rush.
Sealed by a licensed Professional Engineer: FL PE 82229, Certificate of Authorization 35353.
